C84 Long Bed Pickup Utility Canopy

This is the first release by Mahlynn Creations. The C84 Long Bed Utility Canopy is specifically designed to fit to the bed of the C84 Long Bed Pickup Model that has the 329-333 mm wheelbase. This will require removing the tailgate area from the rear of the bed or by downloading and printing the alternate rear bed with the tailgate already removed, which you can download for free from the link at the bottom of this description. Model includes loose window frames and rear door. (This file set does not include alternate rear bed as shown in pictures.)

User will need to determine best way to mount canopy shell to bed and door to canopy shell. Good luck on your build!

Dimensions: W=195 mm, H=140 mm, L=264 mm

Download free alternative C84 Long Bed Pickup rear bed without tailgate HERE

Scale Kegs for the R50 Retro Styled Scale Garage Drink Cooler (Non-Functional)

Tall = 59 mm H X 42 mm Round

Short = 35 mm H X 42 mm Round.

Keep in a Scale, Cool and Dry place.

16 Ft Herman Explorer - Runabout

This Garage Accessory includes Throttle Controls, Steering Wheel, Front Seating and optional Live Well/Engine Cover.

Trailer for towing this accessory is not included.

User will need to determine best way to mount Steering Wheel to Dash, Throttle Controls to Shell, Seating to shell and Live Well/Engine Cover to Rear Seating/shell if used. Good luck on your build!

Dimensions: W=185 mm, H=160 mm, L=488 mm.

Every garage needs that one project……

50R Retro Styled Drink Cooler

This Garage Accessory includes Handle, Door Hinges, and optional beer tap to affix to door.

Beer tap will likely require a fine nozzle to achieve appropriate look.

User will need to determine best way to mount Door to Box and Beer Tap to front of door.

Dimensions: W=86 mm, H=174 mm, L=93 mm.

Even a scale cave needs a beer cooler……..

NOTE: Tiny hinges are difficult to pull off. And with this model you can expect that due to the role of thermal dynamics things may not line up as perfectly as you would like. Turn up wall thickness for the Door and Box part. Be patient and gentle when working with the hinges. Be prepared to file and sand to get a smooth fit and provide clearance where the door meets the box hinge areas and where the door hinge meets the box edge (See the picture on this page). We have used tiny nails from the hardware store as well as sections of paperclip to use as the hinge pins on various projects. In some cases we have had to run a small drill bit down through the holes by hand in order to clean up the interiors of the hinge holes. If all else fails it might just be easiest to glue the door to the box.

Good luck on the build!

24in Bank of Drawers

This Garage Accessory includes a Top, Cabinet Box, Face Frame , 4 Drawers that are functional and a Toe Kick.

Even a Scale Cave needs Cabinets….

Dimensions: W=61 mm, H=91.5 mm, L=65mm.

NOTE: Be prepared to file and sand to get a smooth fit and provide clearance where the drawer slides in the box (See the picture on this page).

Good luck on the build!

18 in Base Lower Hinged Left with Slab door

This Garage Accessory includes Door, Door Hinges, Face Frame, Top and Toe Kick.

User will need to determine best way to mount Door to Face Frame, Face Frame to Box, Top to Box and Toe Kick to Box.

Dimensions: W=45.72 mm, H=91.44 mm, L=64.77 mm.

Even a scale cave needs Cabinets….

NOTE: Tiny hinges are difficult to pull off. And with this model you can expect that due to the role of thermal dynamics things may not line up as perfectly as you would like. Turn up wall thickness for the Door and Box part. Be patient and gentle when working with the hinges. Be prepared to file and sand to get a smooth fit and provide clearance where the door meets the box hinge areas and where the door hinge meets the box edge (See the picture on this page). We have used tiny nails from the hardware store as well as sections of paperclip to use as the hinge pins on various projects. In some cases we have had to run a small drill bit down through the holes by hand in order to clean up the interiors of the hinge holes. If all else fails it might just be easiest to glue the door to the box.

Good luck on the build!

18 in Lower Hinged Right with Slab Door

This Garage Accessory includes Door, with Integrated Door Hinges, Top, Cabinet Box, Face Frame with integrated Door Hinges and Toe Kick

User will need to determine best way to mount Door to Face Frame, Face Frame to Box, Top and Toe Kick to Box.

Even a Scale Cave needs Cabinets….

Dimensions: W=45.72 mm, H=91.44 mm, L=64.77 mm.

NOTE: Tiny hinges are difficult to pull off. And with this model you can expect that due to the role of thermal dynamics things may not line up as perfectly as you would like. Turn up wall thickness for the Door and Box part. Be patient and gentle when working with the hinges. Be prepared to file and sand to get a smooth fit and provide clearance where the door meets the Face Frame hinge areas (See the picture on this page). We have used tiny nails from the hardware store as well as sections of paperclip to use as the hinge pins on various projects. In some cases we have had to run a small drill bit down through the holes by hand in order to clean up the interiors of the hinge holes. If all else fails it might just be easiest to glue the door to the box.

Good luck on the build!

18x30 Upper HR

This Garage Accessory includes Door, Door Hinges,Face Frame and Cabinet Box.

User will need to determine best way to mount Door to Face Frame and Face Frame to Box

Dimensions: W=45.72 mm, H=76.2 mm, L=33.02 mm.

Even a scale cave needs Cabinets….

NOTE: Tiny hinges are difficult to pull off. And with this model you can expect that due to the role of thermal dynamics things may not line up as perfectly as you would like. Turn up wall thickness for the Door and Box part. Be patient and gentle when working with the hinges. Be prepared to file and sand to get a smooth fit and provide clearance where the door meets the box hinge areas and where the door hinge meets the box edge (See the picture on this page). We have used tiny nails from the hardware store as well as sections of paperclip to use as the hinge pins on various projects. In some cases we have had to run a small drill bit down through the holes by hand in order to clean up the interiors of the hinge holes. If all else fails it might just be easiest to glue the door to the box.

Good luck on the build!