The Scale Vehicle Models/Shells
Will Require custom or modified Chassis
Click a models picture to navigate to that models details
We only sell files that can be 3D printed, we do not offer a 3D print service and do not provide 3D printed/assembled kits.
The C\S PW85 Crew Cab Fleetside LB
This vehicle shell has a wheel base of 417 to 421 mm. Grill, Headlight Lens, Front Turn signal Lens, Front Turn Signal Buckets, Tail Light Buckets and Tail Light Lens included.
Hood included but not attached. User will need to determine best way to mount hood to shell as well as Shell to Chassis of choice
Dimensions: W=194 H=132 mm L=610 mm WB=417 to421 mm
Note: This shell will require a custom chassis with an extended wheelbase.
HDB 12 Coach WarpMaster
This vehicle shell has a wheel base of 381 mm to 385 mm and will require a custom chassis. Grill, Headlight Lens, Headlight Bucket, Front Side Markers, Front Bumper, Tail Light Lens, Tail Light Bucket, and Rear Bumper included.
User will need to determine best way to assemble Shell and mount Shell to Chassis of choice. User will also need to determine best way to mount included accessories to shell or chassis of choice.
Virtual Achievement Unlock available - Print, assemble, and keep it all straight to unlock the virtual achievement “WarpMaster”….good luck.
Dimensions: W=195 mm H=247 mm with Bumpers as shown L=781 mm as shown with Bumpers WB=381 mm to 385 mm.
The H3500 Morex Crew Cab Short Box
This vehicle shell has a wheel base of 361 to 365 mm. Grill, Bumper, Headlight Lens, Front Turn Signal Lens, Head Light Bucket, Front Turn Signal Bucket, Mirrors, Door Handles, Tail Light Lens, Tail Light Bucket, Tailgate Handle and Bed Rack included.
User will need to determine best way to mount Hood to Shell , Bed Rack to Bed and Shell to Chassis of choice. Good luck on your build!
Dimensions: W=195 mm w/o Mirrors or 228 mm with Mirrors H=131 mm w/o Bed Rack or 153 mm with Bed Rack L=560 mm WB=361 mm to 365 mm
The C\S PW85 Crew Cab Stepside
This vehicle shell has a wheel base of 373 to 377 mm. Grill, Headlight Lens, Front Turn signal Lens and Front Turn Signal Buckets included.
Hood included but not attached. User will need to determine best way to mount hood to shell as well as Shell to Chassis of choice
Dimensions: W=194 H=132 mm L=540 mm WB=373 to 377 mm
Note: This shell will require a custom chassis with an extended wheelbase. Dually Stepside beds designed for use with this Crew Cab variant are available HERE for free. These Dually Stepside beds may work with the other Cab variants of this model line. However, keep in mind that as we do not use real world dimensions so some alterations are made during layouts that might result in slight differences at the wheelbase or other locations.
C58 Impact Crew Cab FS
This vehicle shell has a wheel base of 405 mm to 409 mm. Hood, Front Bumper, Grill, Headlight Beauty Ring, Headlight Lens, Front Turn Signal Lens and Rear Tail Light lens with beauty ring included.
User will need to determine best way to mount hood to shell and shell to chassis of choice. Good luck on your build!
Dimensions: W=195 mm, H=164 mm, L=588 mm with provided Bumper, WB=405 to 409 mm
Note: This model as shown will likely require a custom chassis.
C69 CCLB Pickup
This vehicle shell has a wheel base of 418 to 422 mm. Grill, Bumper, Headlight Lens, Front Turn Signal Lens, Front Turn Signal Buckets and Rear Tail Light Lens included. Bed should be considered near full depth.
User will need to determine best way to mount Hood to shell and Shell to Chassis of choice. Good Luck on your build!
Dimensions: W=195 mm H=150 mm L=639 mm WB=418 to 422 mm
H2500 92 Crew Cab w/ Dually Option
This vehicle shell has a wheel base of 423 mm to 427 mm. Grill, Headlight Lens, Front Turn Signal Lens, Tail Light Lens, Hood, Front Bumper and Dually Fenders included.
User will need to determine best way to mount hood to shell, Dually Fenders to bed and shell to chassis of choice. Good luck on your build!
Dimensions: W=195 mm, H=137 mm, L=594 mm, WB=423 to 427 mm
C\S 66 Dasher Crew
This vehicle shell has a wheel base of 368 mm to 372 mm. Hood, Grill, Headlight Lens, Front Turn Signal Lens, and Rear Tail Light Lens included
User will need to determine best way to mount hood to shell and shell to chassis of choice. Good luck on your build!
Dimensions: W=195 mm, H=154 mm, L=556 mm, WB=368 to 372 mm
C84 Crew Dually Pickup
This vehicle shell has a wheel base of 415 mm to 419 mm. Front Bumper, Grill, Headlight lens, Front Turn Signal, Front Turn Signal Buckets, Rear Tail Light Lens and “Dually” Fenders included.
User will need to determine best way to mount “Dualy” Fenders to bed, hood to shell and shell to chassis of choice. Good luck on your build!
Dually Fenders are separate from bed to allow bed printing and choice of body that is Dually or not. Dually fenders may require sanding/filing to achieve desired fit. When using Dually Fenders it is advised that the inner fender/bed wall be cut/removed inside the applied fenders to allow clearance for tires.
Dimensions: W=195 mm w/o Fenders - 237 mm w/ Fenders, H=142 mm, L=604 mm with Bumper, WB=415 to 419 mm
Note: We also have made the CT90 Torch accessories available for free Here.
76 Commonwealth Libertine Crew
This vehicle shell has a wheel base of 368 to 372 mm. Headlight, Front Turn Signal, Front Bumper, Grill and Tail Light Lens included.
User will need to determine best way to mount Hood to shell and mount Shell to Chassis of choice
Dimensions: W=195 mm H=143 mm L=549 mm WB=368 to 372 mm
C90 Cab-n-Half Short Box
This vehicle shell has a wheel base of 355 to 360 mm. Front Bumper, Mirrors, Headlight lens, Headlight Bucket, Rear Tail Light lens included.
User will need to determine best way to mount Hood to Shell and Shell to Chassis of choice. Good luck on your build!
Dimensions: W=195 mm H=137 mm L=541 mm WB=355 to 360 mm
Note: Alternate hoods for the C90’s Line are free to download from Here
C90 Cab-n-Half Long Box
This vehicle shell will require a custom chassis and has a wheel base of 393 to 397 mm. Front Bumper, Mirrors, Headlight lens, Headlight Bucket, Rear Tail Light lens included.
User will need to determine best way to mount Hood to Shell and Shell to custom Chassis of choice. Good luck on your build!
Dimensions: W=195 mm H=137 mm L=578 mm WB=393 to 397 mm
Note: Alternate hoods for the C90’s Line are free to download from Here
50HC 5000LH
Our first attempt at a C.O.E Truck (Cab Over Engine) and can still be printed within the 200 mm X 200 mm hotbed footprint as other models. The more this came together the more it compelled. WiseKracker Custom Sleeper is of course optional along with the stacks. This vehicle appears to have a required WB of 400 mm for a single rear axle setup with the use of the sleeper. Of course that is only a suggested minimum for using the sleeper. Quite sure the community will develop custom chassis for this model.
User will need to determine best way to mount Shell to Chassis of choice
Dimensions: W=194 mm H=296 mm L=390 mm using the sleeper and stacks WB=400? Plus/Minus depending on use case.
The H2500 4 in 1 Multi Kit
This vehicle shell kit is a combination of all the parts that make up the Cab-n-Half Long and Short Beds as well as the Standard Cab Long and Short Beds. Headlight & Tail light lens provided along with rear buckets. Depending on which combination you choose they can accommodate multiple wheelbase chassis from 240 to 331 mm. Descriptions of each model sold independently can be referenced for specific wheelbases.
Hood included but not attached. User will need to determine best way to mount hood to shell as well as Shell to Chassis of choice
Dimensions: W=189 mm H=130 mm L=445 mm WB=240 to 331 mm (Depending on configuration choosen.)
Notes:
(Added 9/26/2017, Improved Front Clip design, you may need to trim alignment tabs on the cab to fit the new design)
(Added 01/26/2018, Wheelbase given for Standard Cab Long Box identified as being incorrect, correction made to reflect accurately 285 mm to 290 mm Wheelbase on its respective page)
82 FT LH COE
This vehicle shell has a wheel base of 345 to ??? mm. Grill, Aux Grill, Front Bumper, Sun Visor, Fender Flares, Side Steps, Door Handles, Stacks, Tanks, Headlight Lens and Headlight Beauty Rings included.
User will need to determine best way to mount Bumper, Shell, Stacks and Tanks to Chassis of choice.
Dimensions: W=195 mm w/o Fender Flares or 203 mm with, H=286 mm as shown, L=348 mm as shown, WB=345 to ??? mm
BOS302 Bus
ATTENTION!: This model is a deviation from our norm and will require a larger 3D Printer build plate volume. We suggest for this model a build volume of 250 mm Wide X 250 mm Deep X 180 mm High as the Minimum.
This vehicle shell has a wheel base of 503 mm to 507 mm and will require a custom chassis. Grill, Headlight Lens, Front Side Markers, Front Bumper, Tail Light Lens, and Rear Bumper included.
User will need to determine best way to assemble Shell, and mount Shell to Chassis of choice. User will also need to determine best way to mount included accessories to shell or chassis of choice.
Dimensions: W=195 mm, H=227 mm, L=946 mm as shown with Bumpers WB=503 mm to 507 mm.
KremLink TwT 9TN
This vehicle shell has a wheel base of 400 mm to 450 mm. Front Bumper, Front Turn Signal Lens, Headlight Lens, Headlight Beauty Rings, Grill, Mirrors, Roof Vent and Fuel Tanks included.
User will need to determine best way to mount Bed, Accessories and Shell to Chassis of choice. Good luck on your build!
Dimensions: W=195 mm, H=194 mm as shown with tanks, L=638 mm as shown with bed, WB=400 to 450 mm
C92 Crew Long Box Dually Option
This vehicle shell has a wheel base of 445 to 449 mm. Front Bumper, Mirrors, Headlight lens, Headlight Bucket, Rear Tail Light lens and Dually Fenders included.
User will need to determine best way to mount Hood to Shell, Dually Fenders to Bed and Shell to Chassis of choice. Good luck on your build!
Dimensions: W=195 mm H=137 mm L=630 mm WB=445 to 449 mm
Note: Alternate hoods for the C90’s Line are free to download from Here
PW 94 Pickup Super Crew Cab Long Box
This vehicle shell has a wheel base of 445 mm to 449 mm. Dually Fenders, Grill, Front Bumper, Mirrors, Headlights Lens, Headlight Buckets and Tail Light Lens included.
User will need to determine best way to mount Hood to Shell, Dually Fenders to Bed as well as Shell to Chassis of choice.
Dimensions: W=195 mm H=133 mm L=620 mm WB=445 mm to 449 mm.
NOTE: It was brought to our attention on 01/20/2022 that there may be a defect in the Front Clip File for these models. Thank you Joseph for bringing this to our attention. After investigating it was determined to be the same issue as another similar issue and a correction was made. That corrected front clip file is available as a Free Download HERE.
H56 1000 SCC LB Pickup
This vehicle shell has a wheel base of 445 mm to 449 mm. Grill, Front Bumper, Front Turn Signal Lens, Headlights Lens, and Headlight Buckets included.
User will need to determine best way to mount Hood to Shell as well as Shell to Chassis of choice.
Dimensions: W=195 mm H=172 mm L=647 WB=445 mm to 449 mm.
NOTE: It was brought to our attention on 1/4/2022 that a defect was present in the Front Clip file for the alternate related models. This model has the corrected Front Clip present in the files you will download after purchase.
68 Commonwealth Libertine Crew Cab Extended Box
This vehicle shell has a wheel base of 445 to 449 mm. Headlights, Front Turn Signal, Front Bumper, Grill, Tail Light Lens and optional Dually Fenders included.
User will need to determine best way to mount Hood and optional Dually fenders to shell and mount Shell to Chassis of choice
Dimensions: W=195 mm w/o Dually Fenders or 240 mm with H=133 mm L=613 mm WB=445 to 449 mm
C84 Crew Long Bed Pickup
This vehicle shell has a wheel base of 442 mm to 446 mm (Stretched Variant). Front Bumper, Grill, Headlight lens, Front Turn Signal, Front Turn Signal Buckets, and Rear Tail Light Lens.
User will need to determine best way to mount hood to shell and shell to chassis of choice. Good luck on your build!
Dimensions: W=195 mm w/o Fenders - 237 mm w/ Fenders, H=142 mm, L=631 mm with Bumper, WB=442 to 444 mm
C63 Smooth Super Crew LB Daully
This vehicle shell has a wheel base of 445 to 449 mm. Grill, Headlight, Front Turn Signal, Front Turn Signal buckets and Rear Turn Signal lens included.
User will need to determine best way to mount Hood to Shell and Shell to Chassis of choice
Dimensions: W=195 mm H=154 mm L=647 mm WB=445 to 449